Chronomatic-293  (120-1593)          Preparation       Faxback Doc. # 3997

CONNECTING TO AC POWER

Plug the power cord into a standard AC outlet.

INSTALLING THE BACK UP BATTERY

To keep the clock running in the event of an AC power failure, install a
9-volt battery such as Radio Shack Cat. No. 23-553.  A fresh battery can
keep the clock running for up to 8 hours and sound the alarm for up to 10
minutes.

1.  Turn the radio over and locate the battery compartment.  Pull back the
    battery compartment cover's tab, and remove the cover.

2.  Snap the battery into the battery terminals.

3.  Replace the cover.

Notes:  If the BATTERY SENTINEL INDICATOR on the right of the clock
        display lights, change the battery.

        If the display flashes after an AC power failure, the battery is
        too low to accurately power the clock.  Replace the battery and
        reset the clock.

(LB/all-01/17/95)