STAV-3370 Digital Synthesized Stereo
(310-3032)           Using the Remote Control         Faxback Doc. # 31163

The remote control works up to a distance of about 23 feet, and within a
30-degree angle on either side of the receiver.  Point the control at the
receiver's front and press the desired button(s).

Many buttons on the remote control work the same as buttons on the
receiver's front panel.  Use these buttons exactly as you would use the
corresponding buttons on the receiver.

AUDIO/VCR Switch

The remote control can also control other compatible audio/video components
when you connect them to the receiver's CONTROL OUT jack.  Set the switch
to AUDIO to control audio components such as CD players or cassette decks.
Set the switch to VCR to control video components such as a VCR.

When you set the switch to VCR, dual-function buttons control the function
marked in gold next to the button.  For example, the button marked CENTER
MODE and TEST TONE operates as the center mode adjust when you set the
switch to AUDIO and as the delay time function when you set the switch
to VCR.

Receiver/Amplifier Section

FUNCTION     Section a program source (VCR/Tape 1, LD, CD, tuner, or
             phono).  Repeatedly press FUNCTION until the display shows
             your desired program source.

-MASTER      Adjusts the system's volume.
 VOLUME +

CENTER MODE  Selects among the three center mode settings with AUDIO/
             VCR set to AUDIO.

- CENTER +   Controls the relative volume of the center speaker with
             AUDIO/VCR set to AUDIO.

- REAR +     Controls the relative volume of the rear speakers with
             AUDIO/VCR.

TEST TONE    Sounds test tones from each speaker with AUDIO/VCR set to
             VCR.

DELAY TIME   Sets the rear-channel delay for Dolby Pro-Logic Surround
             or Simulated Surround sound.

SURR MODE    Selects between Dolby Pro-Logic Surround or Simulated
             Surround sound.

SLEEP        Sets the receiver to turn off after 90, 60, or 30 minutes
             with AUDIO/VCR set to AUDIO.  To start the timer, repeatedly
             press SLEEP until the desired turn-off time (90, 60, or 30)
             appears.  To cancel the timer, repeatedly press SLEEP until
             the sleep time disappears from the display.

RECEIVER     Turns the receiver on and off.
POWER

RETURN       Returns the receiver to its default settings.

3CH LOGIC    Selects Dolby 3 CH Logic.

TAPE 2       Switches the receiver to monitor the source connected to the
MONITOR      TAPE 2 MONITOR jacks.

MUTING       Silences the receiver.  Press again to restore the sound to
     its previous level.

- TUNING +   Tunes to radio stations with AUDIO/VCR set to AUDIO.

     Manual Tuning:  Press once to select the next higher or lower
                     frequency.  Or, press and hold down to rapidly change
                     frequencies.

  Automatic Tuning:  To search for the next higher or lower station,
                     release + TUNING - when the frequency starts to
                     change.  The receiver searches up or down the band
                     until it finds a strong station.

- STATION +  Press to move the next higher or lower memory location with
             AUDIO/VCR set to AUDIO.

CD PLAYER

CD POWER     Turns the CD player on and off (only for CD players having
             the CONTROL IN/OUT feature).

|<< and >>|  Returns to the beginning of the current track or advances to
             the next track.

- DISC       Selects disc in a multi-play CD changer.
SELECT +

    NOTE:  Some CD players might not be selected by DISC SELECT.

>            Plays the CD.

Box          Stops playback.

USING THE REMOTE CONTROL

Before operation:

    Set AUDIO/VCR to AUDIO for a cassette deck or to VCR for a VCR.

    For a cassette deck, select TAPE 2 MONITOR or VCR/TAPE 1.

    For dual cassette deck, select DECK 1 or DECK 2.  If you use a single
    cassette deck, press DECK 2.

>            Press to start normal play.

<            Press to play the reverse side of an auto-reverse cassette
             deck.

||           Press to cancel the current function.

<< and >>    For cassette deck, lets you quickly locate and play the
             beginning of recorded material during play.

     When the tape is stopped, lets you rapidly search forward
     or backward to locate a specific section of the tape.

     For a VCR, lets you rapidly view a tape either forward or
     backward.

DECK1/DECK2  Selects Deck 1 or DECK 2 when you use a dual cassette deck
             with AUDIO/VCR set to AUDIO.

TAPE POWER   Turns on the connected VCR with AUDIO/VCR set to VCR;
             turns on the cassette deck with AUDIO/VCR set to AUDIO.

- VCR CH +   Moves to the next higher or lower channel with AUDIO/VCR
             set to VCR.

TV/VCR       Selects between normal TV viewing and VCR input with AUDIO/
             VCR set to VCR.

TAPE SELECT  Selects cassette 1 to 6 for a multi-cassette changer.


(SP/LB 03/06/96)