STAV-3250 AM/FM Stereo Receiver
(310-3021)               Care and Maintenance         Faxback Doc. # 31988

The STAV-3250 Digital Synthesized A/V Surround Receiver is an example of
superior design and craftsmanship.  The following suggestions will help you
care for the receiver so you can enjoy it for years.

    Keep the receiver dry.  If it gets wet, wipe it dry immediately.
    Liquids can contain minerals that can corrode the electronic circuits.

    Handle the receiver gently and carefully.  Dropping it can damage 
    circuit boards and cause the receiver to work improperly.

    Use and store the receiver only in normal temperature environments.
    Temperature extremes can shorten the life of electronic devices,
    and distort or melt plastic parts.

    Keep the receiver away from dust and dirt, which can cause premature
    wear of parts.

    Wipe the receiver with a damp cloth occasionally to keep it looking
    new.  Do not use harsh chemicals, cleaning solvents, or strong
    detergents to clean the receiver.

Modifying or tampering with the receiver's internal components can cause a
malfunction and might invalidate your warranty and void your FCC
authorization to operate it.  If your receiver is not performing as it
should, take it to your local Radio Shack store for assistance.  Our
personnel can assist you and arrange for service if necessary.

THE FCC WANTS YOU TO KNOW

Your receiver might cause interference on other radio/TV devices even when
it is operating properly.  To determine whether your receiver is causing
the interference, turn off your receiver.  If the interference goes away,
your receiver is causing the interference.  Try to eliminate the
interference by:

    Moving your receiver away from the other device

    Connecting your receiver to an outlet that is on a different electrical
    circuit from the other device.

    Contacting your local Radio Shack store for help.

If you cannot eliminate the interference, the FCC requires that you stop
using your receiver.

CAUTION:  Any changes or modifications in construction of this device which
          are not expressly approved by the party responsible for
          compliance could void the user's authority to operate the
          equipment.


(02/19/96)