Monophonic L-Pad
(400-0980)                   Connections              Faxback Doc. # 32308

TWEETER-LEVEL CONTROL

Follow these steps if you plan to use your L-pad as a tweeter-level
control.

NOTE:  Solder the speaker wires or use a crimping tool to connect the
       wires to your L-pad.

1.  Connect the crossover network's low-frequency lead to your woofer's
    positive (+) terminal.

2.  Connect your woofer's negative (-) terminal to your tweeter's positive
    terminal.

3.  Connect your crossover network's high-frequency lead to Terminal 3 on
    your L-pad.

4.  Connect the crossover network's common lead to the connection between
    the woofer and tweeter.

5.  Connect the tweeter's negative Terminal 2 on your L-pad.

6.  Connect Terminal 1 on your L-Pad to the common lead.


VOLUME-LEVEL CONTROL

Follow these steps if you plan to use your L-pad as a volume control.

1.  Connect your amplifier/receiver's positive (+) speaker output leads to
    Terminal 1 on your L-pad.  Then, connect a wire from Terminal 1 to the
    speaker's positive terminal.

2.  Connect your amplifier/receiver's negative (-) speaker output leads to
    Terminal 3 on your L-pad.

3.  Connect your speaker's negative terminal to Terminal 2 on your L-pad.

CAUTION:  To prevent a short circuit or damage to your speaker, be sure
          the speaker wires touch only their intended terminals.


(IR-04/26/96)