Monophonic L-Pad
(400-0980)                   Operation                Faxback Doc. # 32309

The primary purposes of this L-pad are to balance the output between the
tweeter and woofer in a two-way speaker system or to balance the sound
between two speakers in a single room.

Carefully read these instructions and cautions before you operate your
L-Pad.

1.  Set the L-pad's AUDIO LEVEL control to MAX. (maximum).

2.  Set the amplifier/receiver's volume to minimum.  Then, turn on the
    amplifier/receiver and set its volume control slightly above the
    normal listening level.

3.  Set the AUDIO LEVEL control for the desired balance or volume.

CAUTION:  This L-pad is designed for 25 watts of peak music power under
          certain conditions.  If you use the L-pad to totally regulate
          the volume of a speaker, and turn the L-pad to its lowest
          setting while the amplifier/receiver operates, the maximum power
          that it can handle is 12 watts.

NOTE:  If the volume is inadequate at MAX. (maximum), slightly increase
       the amplifier/receiver's volume.


(IR-04/26/96)