Electronic Portable CD Player Mount for all Cars, Trucks, and RVs 
(420-3051)                 Connections                Faxback Doc. # 32538

POWERING YOUR CD PLAYER

The CD player mount can supply power to most portable CD players with the
supplied DC power cord.

CAUTIONS:  Your vehicle must have a 12-volt DC, negative-ground
           electrical system.

           When you are not using your CD player, turn it off and unplug
           the adapter.  Always unplug the adapter from the cigarette
           lighter socket before you unplug it from your CD player.

FOLLOW THESE STEPS TO CONNECT YOUR CD PLAYER TO DC POWER

  1.  Determine the DC voltage input requirements of your portable CD
      player.  Look for this information on the CD player itself, or in its
      accompanying owner's manual.

  2.  Adjust the switch on the bottom of the CD player mount to the proper
      voltage.

  3.  Choose the adapter end that correctly first the DC jack on the CD
      player.  Then plug the adapter end into the DC power cord by aligning
      the polarity marks (+ and -) as specified in the CD player owner's
      manual.

  4.  Plug the entire assembly into the CD player.

  5.  Plug the cigarette lighter adapter into your vehicle's cigarette
      lighter socket.  The green indicator on the CD player mount lights.

      NOTE:  You can connect the adapter directly to your vehicle's
             battery.  Connect the black/white wire to the 12v positive (+)
             battery terminal, and the black wire to a chassis ground that
             is not insulated from the vehicle by a plastic part.


(YO/EB 4/23/96)