AM/FM Headset Radio
(120-0916)                 Preparation                Faxback Doc. # 32632

BATTERY INSTALLATION

Your headset requires two AAA batteries (not supplied).  For the best
results, we recommend alkaline batteries, such as RadioShack Cat.No.
23-555.

Follow these steps to install batteries.

1.  Press the battery compartment cover and slide it in the direction of
    the arrow.

2.  Install two AAA batteries, as indicated by the polarity symbols
    (+ and -) marked beside the compartment.

3.  Replace the cover.

Notes:  Replace both batteries when BATTERY appears on the display.

        If you are not going to use the headset for a week or more, remove
        the batteries to avoid possible damage from leaking batteries.

ADJUSTING THE HEADSET

1.  Rotate the inner back-support band toward the back so it is at a right
    angle to the outer headband.  Then place the headset over your head.

2.  Adjust the outer headband by first positioning the rubber ear-cushions
    directly over your ears, then sliding each side of the headband's
    center section in or out until it fits snugly across the top of your
    head.

3.  Adjust the inner back-support band by sliding the grips until it fits
    snugly across the back of your head.


(RMF/all-05/09/96)