PRO LX7 Bookshelf Speaker
(400-4063)                 Connections                Faxback Doc. # 32908

With a pair of speakers placed in their approximate locations, measure the
distance from each speaker to your receiver/amplifier.

Use 18 gauge speaker wire for distances of 50 feet or less.  For distances
greater than 50 feet, use heavier 16-gauge wire.

NOTE:  For maximum bass response and the best overall performance, connect
       your speakers' terminals to the corresponding terminals on the
       receiver/amplifier (+ to +, and - to -).  You can easily make the
       proper connections with coded speaker wire, available at your local
       Radio Shack store.

1.  Separate the wire's two conductors at both ends for a length of about
    4 inches.

2.  Strip the insulation from the ends of each conductor to expose 1/4 inch
    of metal wire, then twist the loose wire strands.

3.  Turn the left speaker's negative (-) terminal counterclockwise to
    loosen it and insert one of the wire ends into the opening.  Then turn
    the terminal clockwise to tighten it.

4.  Turn the left speaker's positive (+) terminal counterclockwise to
    loosen it and insert one of the wire ends into the opening.  Then turn
    the terminal clockwise to tighten it.

5.  Using the speaker wire's code as a guide, connect the wire from the
    left speaker's negative (-) terminal to the receiver/amplifier's left
    negative (-) terminal.

    Then connect the wire from the left speaker's positive (+) terminal to
    the receiver/amplifier's left positive (+) terminal.

6.  Repeat Steps 1-5 to connect the right speaker to the receiver/
    amplifier's right terminals.


(BR/EB 5/6/96)