70-Volt/100 Watt Line Transformer
(320-1034)                 Features                   Faxback Doc. # 33224

The 70-Volt/100 Watt Line Transformer converts a PA amplifier's 4-Ohm
output for use with 70-volt line transformer speaker connections.  This
type of system minimizes power loss when speakers are located long
distances from the amplifier and simplifies the connection of multiple
speakers (more than 4 speakers), especially if all speakers do not have the
same impedance.

NOTES:  You can use the transformer with amplifiers that have 8- or 16-Ohm
        speaker outputs, but the amplifier's efficiency is reduced - you do
        not get the amplifier's full power.

        You need a 70-volt/10 watt line transformer (Cat. No. 32-1031) at
        each speaker to convert the 70-volt signal to speaker-level
        signals.

        You can use the transformer with amplifiers that have up to 100
        watts of continuous output power per channel.

        You can use one transformer for each channel of a stereo PA
        amplifier or home stereo system.


(SP/EB 5/21/96)