MPA-45  (320-2035)         Specifications              Faxback Doc. # 8723

Output Power at 4 ohm, 1 kHz 5% THD...............................35 watts
Power Bandwidth at 10 W, 5% THD.............................40 Hz - 45 kHz

T.H.D. at 20 W, 1kHz with kHz Low Pass Filter

MIC 1................................................................0.13%
MIC 2................................................................0.13%
AUX..................................................................0.06%
PHONO.................................................................0.5%

Input Sensitivity 1 kHz 5% TDH

MIC 1...............................................................2.2 mV
MIC 2...............................................................2.2 mV
AUX (L/R EACH)......................................................150 mV
PHONO.(L/R EACH)....................................................2.4 mV

Signal to Noise Ratio (Input Shorted) with 30kHz Low Pass Filter

MIC 1................................................................65 dB
MIC 2................................................................65 dB
AUX..................................................................71 dB
PHONO................................................................61 dB

Frequency Response at 4 ohm 1W + 1/3-dB

MIC 1...........................................................67Hz-20kHz
MIC.2..........................................................67 Hz-20kHz
AUX...........................................................67 Hz-20 kHz
PHONO (RIAA 100Hz/10kHz)..................................+12.7 dB/-12.8dB

Frequency Equalizer Controls (Aux Input, Output 2V/4 ohm)

150Hz..............................................................+/-12dB
1kHz...............................................................+/-12dB
6 kHz............................................ .................+/-12dB

Hum and Noise at 4 ohm with 30 kHz Low Pass Filter

at Master Volume Min................................................0.19mV
at Master Volume Max (Other Min, Tone Center)........................3.2mV

Power Requirement (BG, FR)....................................220V AC 50Hz
                  (UK, AU)....................................240V AC 50Hz
                  (CANADA)....................................120V AC 60Hz
UL wiring specs......................................CL2 or AWM rated wire

Dimensions:

     Height/Width/Depth...................................290 x 77 x 195mm
     Weight..........................................................4.4kg

Specifications are typical; individual units might vary.  Specifications
are subject to change without notice.

(smc/jlc-02/28/95)