SSM-1200  (320-3002)          Specifications           Faxback Doc. # 8754

INPUT IMPEDANCE:

  MIC 1, 2 (XLR Jack).................................0.5mV 600 Ohms (Low)
  MIC 2 (PHONE Jack)...................................1 mV 600 Ohms (Low)
  MIC 1, 2 (PHONE Jack).............................2.5 mV 10 kOhms (High)
  CD/Line (CD 1, CH 2, CH 3, CH 4).........................120 mV 27 kOhms
  PHONO (CH 1, CH 2, CH 3, CH 4).............................2 mV 50 kOhms

OUTPUT LEVEL:
 
 Recorder Out/Main Out..........................0.775V (0 dB)/1.5 V (6 dB)
 Frequency Response................................20 Hz - 20 kHz +/- 1 dB

DISTORTION:

  MIC..............................................................< 0.5 %
  CD/LINE..........................................................<0.05 %
  PHONO............................................................<0.08 %

S/N RATIO:

  MIC..............................................................> 50 dB
  CD/LINE..........................................................> 65 dB
  PHONO............................................................> 60 dB

EQUALIZER:

Control Frequency.....60 Hz, 150 Hz, 400 Hz, 1 kHz, 2.4 kHz, 6 kHz, 15 kHz
Booster/Cut Range......................................+/- 12 dB at Center
Talkover Attenuation...............................................- 12 dB
Echo............................................................BBD System
Delay Time........................................30 mS - 200 mS with Echo
Power Source................................................AC 120 V/60 Hz
Dimensions..............415/16 x 1815/16 x 11 Inches (11 x 48 x 28 cm HWD)
Weight....................................................1.9 lbs (5.4 kg)

E. I. A. STANDARD FOR RACK-MOUNTED EQUIPMENT:

Width.............................................................482.6 mm
Height............................................................44.45 mm
Depth.........................................................Unrestricted

Specifications are typical; individual units might vary.  Specifications
are subject to change without notice.

(smc/ir-04/11/95)