STAV-3450 (310-3031) Panel Functions Faxback Doc. # 9768 FUNCTION Selects a program source (VCR/Tape 1, LD, CD tuner, or phono). Repeatedly press FUNCTION until the display shows your desired program source. -MASTER VOLUME + Adjusts the system's volume. CENTER MODE Selects among the three center mode settings. (AUDIO-VCR/TV must be set to AUDIO.) -CENTER LEVEL + Controls the relative volume of the center speaker. (AUDIO-VCR/TV must be set to AUDIO.) -REAR LEVEL + Controls the relative volume of the rear speakers. (AUDIO-VCR/TV must be set to VCR/TV.) TEST TONE Sounds test tones from each speaker. (AUDIO- VCR/TV must be set to VCR/TV.) DELAY TIME Sets the rear-channel delay for Dolby Pro-Logic Surround and Simulated Surround programs. (AUDIO- VCR/TV must be set to VCR/TV.) SURR MODE Selects between Dolby Pro-Logic Surround, Simulated Surround, or DSP sound. SLEEP Sets the receiver to turn off after 90, 60, or 30 minutes. To start the timer, repeatedly press SLEEP until the desired turn-off time (90, 60, or 30) appears. To cancel the timer, repeatedly press SLEEP until the sleep time disappears from the display. (AUDIO-VCR/TV must be set to AUDIO.) RECEIVER POWER Turns the receiver on and off. RETURN Returns the receiver to its default settings. 3CH LOGIC Selects Dolby 3CH Logic. TAPE 2 MONITOR Switches the receiver to monitor the source connected to the TAPE 2 MONITOR jacks. MUTING Silences the receiver. Press again to restore the sound to its previous level. AUTO SOURCE CONTROL Stores and recalls the current settings. 1 AND 2 -EFFECT LEVEL+ Changes the DSP effect's level. Tuner/TV Section For these functions, set AUDIO-VCR/TV to AUDIO to control the tuner, or to VCR/TV to control a TV. You must train the remote control for TV functions. -FREQUENCY + Press to move to the next higher or lower frequency. (AUDIO-VCR/TV must be set to AUDIO.) -TV VOLUME + Adjust the TV's volume, (AUDIO-VCR/TV must be set to VCR/TV.) FM/AM Selects the tuner band. (AUDIO-VCR/TV must be set to AUDIO.) TV MODE Selects the TV's mode. (AUDIO-VCR/TV must be set to VCR/TV; for TVs with multiple modes, such as CATV/Tuner.) -STATION + Press to move the next higher or lower memory location. (AUDIO-VCR/TV must be set to AUDIO.) -TV CHANNEL + Press to move to the next higher or lower TV channel. (AUDIO-VCR/TV must be set to VCR/TV.) 1-9, 0/10 Press to recall memorized stations in the tuner mode (AUDIO-VCR/TV must be set to AUDIO.) Press to directly enter the channel number in the TV mode (AUDIO-VCR/TV must be set to VCR/TV.) CD Player Section Set AUDIO-VCR/TV to AUDIO for these functions. CD POWER Turns the CD player on and off (only for CD players having the CONTROL IN/OUT feature). I<<- and ->>I Returns to the beginning of the current track or advances to the next track. DISC SELECT Selects Disc 1 to 6 for a multi-play disc changer. Note: Some CD players might not be selected by DISC SELECT. -> Plays the CD. STOP Stops playback. || Pauses the CD. Tape/VCR Section Before operation: 1. Set AUDIO-VCR/TV to AUDIO for a cassette deck or to VCR/TV for a VCR. 2. For a cassette deck, select TAPE 2 MONITOR or VCR/TAPE 1. 3. For a dual cassette deck, select DECK 1 or DECK 2. If you use a single cassette deck, press DECK 2. -> Press to start normal play. <- Press to play the reverse side of an auto-reverse cassette deck. Note: <- functions only when you use a cassette deck which can play in reverse. (AUDIO- VCR/TV must be set to AUDIO.) STOP Press to cancel the current function. <<- ASMS ->> For a cassette deck, lets you quickly locate and play the beginning of recorded material during play. When the tape is stopped, lets you rapidly search forward or backward to locate a specific section of the tape. For a VCR, lets you rapidly view a tape either forward or backward. DECK 1/DECK 2 Select Deck 1 or Deck 2 when you use a dual cassette deck. (AUDIO-VCR/TV must be set to AUDIO.) TAPE/VCR POWER Turns on the connected VCR when AUDIO-VCR/TV is set to VCR/TV; turns on the cassette deck when AUDIO-VCR/TV is set to AUDIO. -VCR CH + Moves to the next higher or lower channel. (AUDIO-VCR/TV must be set to VCR/TV.) VCR/TV Selects between normal TV viewing and VCR input. (AUDIO-VCR/TV must be set to VCR/TV.) (br/all-02/22/95)