AM/FM Power Antenna  (120-1330)     Disassembly        Faxback Doc. # 3796

If the antenna doesn't extend or retract smoothly, check the shooting-
tube, the antenna mast, and the motor assemblies.

How to Disassemble the Shooting-Tube Assembly

1.  Use a phillips type screwdriver to unscrew the two screws.

2.  Lower the relay box to the bottom of the shooting-tube assembly.

3.  Hold the shooting-tube with your left hand and hold the gear cover
    with your right hand, and pull out the shooting-tube assembly.

    Note:  The lead wire and the shooting-tube are combined into an
           assembly, if the lead wire is broken inside, follow above
           steps to replace the shooting-tube assembly.

(br/all-12/27/94)