Quartz Electronic Digital Car Clock
(630-0832)                  Wiring                    Faxback Doc. # 32721

This clock is designed for negative or positive ground electrical systems.

Black          :  Connect to convenient negative voltage source (for
                  negative ground vehicles this can be metal chassis
                  ground point.)

Red            :  Connect to positive source of voltage (such as the
                  ACCESSORY fuse terminal).

Yellow         :  For negative ground systems, connect to the voltage
                  output terminal of the ignition switch.  This will cause
                  the display to light up only when the ignition is turned
                  on.  However,  the internal quartz-controlled circuitry
                  of the clock will operate continuosly.  For positive
                  ground systems tape the end of this wire so it wont
                  touch other connections.

Green          :  For positive ground systems, connect to the voltage
                  output terminal instead of the yellow one.



(IR-05/13/96)