10-Inch Trunk Box Speakers
(120-1736)                 Connections                Faxback Doc. # 32757

The speaker's enclosures are equipped with easy-to connect, spring-loaded
push terminals.  Your local RadioShack store carries a large selection of
speaker wire.

Remove 1/4 to 1/2 inch of insulation from the end of the wire.  Then press
and hold down the terminal's grooved tab.  Insert the wire's bare end into
the opening, and release the tab.

To ensure proper phasing and maximum bass response, connect each negative
(-) speaker wire to the black input terminal and each positive (+) wire to
the red input terminal.


(RMF/all-05/14/96)