4-Inch Flush-Mount Speakers For Automobiles & Other Vehicles 
(120-1704)                 Connections                Faxback Doc. # 33327

WIRING

1.  Locate the right channel audio (+) lead from the wiring harness.  For
    most Radio Shack/Realistic units, this wire will be green.  Connect it
    to the right speaker (+) terminal.

2.  Locate the left channel audio (+) lead.  For most Radio Shack/Realistic
    units, it will be brown.  Connect it to the left speaker (+) terminal.

3.  Locate the (-) leads.  For most Radio Shack/Realistic units, these will
    be white and gray.  (Some may have a black w/white strip on left
    channel lead.)  Connect these leads to the unmarked (-) speaker
    terminals.

CAUTION:  If the sound system is a high power type (often called a BTL
          type); you must not connect the negative speaker leads together
          or to a common chassis-ground point.  Nor should you interchange
          the Left and Right channel wires.  Ignoring this caution may
          damage the sound system, or at least will reduce power output.


(SP/EB 6/7/96)