SENSATION!  (250-1651)        SETMODEM Utility         Faxback Doc. # 2882

On the the START-UP diskette that comes with the SENSATION! computer,
catalog number 25-1651, there is a file called  SETMODEM.EXE.   This file
allows you to adjust the sensitivity of the Voice/Data Modem to the
extension phone pick-up in your house.

The following is what you would see after you type in SETMODEM at the
A:> prompt.

                 Modem Sensitivity Adjustment

Changing the entry below will adjust your Voice/Data Modem sensitivity
to extension phone pick-up in your house.  We recommend that you
contact Radio Shack Customer Service before adjusting this value.
Press the "Update and Exit" button to save your changes.  Press the
"Factory Default" button to restore the value as it was shipped from the
factory.  Press the "Cancel" button to exit without updating the change.

                            21

 Update and Exit            Factory Default             Cancel

 Program Manager is minimized in the lower left hand corner of the screen.

The SETMODEM.EXE utility is used to adjust the modem sensitivity to
phone extension pick-up in your house.

The default value for the sensitivity is 21.  The lower the number, the
higher the sensitivity.

The user may need to increase the modem sensitivity if the following
occurs:

   The computer continues to play the incoming call announcement after
   the user answers the call.

   The computer does not log outgoing call information.  (Popup on
   Outgoing Call is active.)

The user may need to decrease the modem sensitivity if the following
occurs:

   After a call is ended, the off-hook icon continues to be displayed for
   more than 15 seconds.  (The user may not be able to exit Windows.)


To adjust the modem sensitivity, run the SETMODEM utility from inside
Windows.

To increase modem sensitivity, lower the number in the Modem Sensitivity
dialog box (usually 17-19 is good).

To decrease modem sensitivity, raise the number in the Modem Sensitivity
dialog box.

NOTE:  The SETMODEM utility is only on the Startup disk.

(sm/all-12/16/94)