Pro-60 (200-0309) Features Faxback Doc. # 15350 The Radio Shack PRO-60 Programmable Scanner lets you in on all the action! This scanner gives you direct access to more than 68,000 frequencies including police, ambulance, ham radio, and transportation services. You can select up to 200 channels to scan, and change your selection at any time. The secret to your scanner's ability to scan so many frequencies is its custom-designed microprocessor - a tiny, built-in computer. Your scanner includes these special features: Triple Conversion Superheterodyne - Virtually eliminates any interference Receiver from IF (Intermediate Frequency) images, so you hear only the selected frequency. Hyperscan - Searches through frequencies at 50 steps per second or scans stored channels at 25 channels per second. Monitor Memory - Lets you temporarily save up to 10 frequencies you find during a frequency search so you can decide later if you want to store any of them into permanent channels. Direct Frequency Search - Gives you direct access to every available frequency so you can find interesting broadcasts. Two-Second Scan Delay - Delays scanning for about 2 seconds before moving to another channel, so you can hear more replies. Ten Channel Storage Banks - Lets you store 20 channels in each of 10 storage banks to group frequencies so you can easily identify calls. Liquid-Crystal Display - Shows the selected channel and frequency and the selected functions. Memory Backup - Keeps the frequencies stored in memory even when you remove the batteries. Lockout Function - Lets you set your scanner to skip over specified channels. Keylock - Prevents you from accidentally changing the scanner's programming. Priority Channel - Lets you designate a channel to be scanned every 2 seconds, so you do not miss important calls. AM/FM/WFM Mode - Automatically selects the most common reception type for the band you are scanning, and lets you override that selection. Battery-Saving Circuit - Draws only 40 percent of the normal operating power. Optional Power Sources - Lets you power the scanner from internal batteries, standard AC power (with an optional AC adapter), or from your vehicle's battery (with an optional DC auto adapter). Ni-Cd Battery Charging Circuit - Lets you recharge nickel-cadmium batteries while they are inside the battery compartment. (LB/all-05/24/95)