PRO-2023 Programmable Scanner
(200-0128)               Moving a Frequency           Faxback Doc. # 18512

MOVING A FREQUENCY FROM MONITOR MEMORY TO A CHANNEL

If you want to move a frequency you have stored in the monitor memory to a
channel, follow this procedure.

1.  Press [MANUAL], the channel number, and then [MANUAL] and [PROGRAM].

2.  Press [MONITOR].

3.  Press [ENTER].  The frequency is stored in the specified channel.

4.  If you want to return to a search after this procedure, press down-
    arrow.  To return to the manual or program mode, press [MANUAL] or
    [PROGRAM].  To resume the serach from one of the limit frequencies,
    press the up-arrow to continue.

USING THE RESET SWITCH

The scanner's display might lock up the first time you plug in and turn on
your scanner or if power fails for more than three days.  If the display
locks up, use a pointed object, such as a paper clip, to press and release
the recessed RESET switch (on back panel) while the power is on.  This
procedure clears all the information you have programmed into the scanner. 
Use this procedure only when you are sure your scanner is not working
properly.


(12/15/95)