PRO-2026 Programmable Scanner
(200-0128)            Understanding The Scanner       Faxback Doc. # 18514

A LOOK AT THE DISPLAY

The display has several abbreviated indicators that show the scanner's 
current operating mode.  A quick look at the display will help you 
understand how to operate the scanner.

        LOCK OUT - Appears when the channel you are listening to is 
                   locked out of the scan mode.  See "Locking Out a
                   Channel."

           DELAY - Appears when the scanner is on a channel that you have
                   programmed with the delay feature.  See "Using the
                   Delay Feature."

       WX SEARCH - Appears when the scanner is in the weather band mode.

        PRIORITY - Appears when the scanner is in the priority mode.

          - - -  - Appears during a search.  Lo and Hi also appear in the
                   display to prompt you to search the lower and upper
                   limit frequencies.

              CH - Indicates the current channel.

         MHz/kHz - Indicators which frequency the scanner is tuned to.

           ERROR - Appears when you made an incorrect entry.

A LOOK AT THE KEYBOARD

The scanner's keys might seem confusing at first, but this information
should help you understand the key's functions.

            SCAN - Causes your scanner to scan through the programmed 
                   channels.

         LOCKOUT - Turns on the lock out function.  See "Locking Out a 
                   Channel."

           DELAY - Turns the delay feature on or off for the current
                   channel.  See "Using the Delay Feature."

        PRIORITY - Turns the priority feature on or off for Channel 1.

          MANUAL - Stops the scanning and allows you to directly enter a 
                   channel number.

Limit DOWN ARROW - Search for and active frequencies within a specified
and UP ARROW       range.  See "Searching for Active Frequencies."

     Number Keys - Used to enter a channel number or frequency

           CLEAR - Deletes an incorrect entry.

           ENTER - Enters the frequency when programming channels.

         PROGRAM - Programs frequencies into channels.

              WX - Scans through the preprogrammed weather channels or
                   enters frequencies into channels.

         MONITOR - Accesses the monitor memories.  See "Moving a Frequency
                   from a Monitor Memory to a Channel."


(BR/smc-05/16/94)