SWR / Power Meter
(210-0524)                 Connections                Faxback Doc. # 33335

CONNECTING THE METER

Follow these steps to connect the meter to your transmitter:

1.  Disconnect the antenna cable from the transmitter's antenna terminal.
    Then, connect the antenna cable to the meter's ANT terminal.

    If you will perform a test using a 50-Ohm dummy load instead of an
    antenna, connect the dummy load to the meter's ANT terminal.

2.  Connect a short 50-Ohm cable, such as type RG-58U, between the
    transmitter's antenna terminal and the meter's TRANS terminal.

(SP/EB 6/7/96)