HTX-404  (190-1140)             Error Codes             Faxback Doc. # 6178

The HTX-404 has two error code displays.  This section explains each error
code.

Er1 indicates that the HTX-404 has detected an error in its battery-backed
up memory.  This is most commonly caused by a low lithium backup battery,
but can also be caused by static discharge or a physical shock.  To clear
the error, reset the HTX-404 by turning it off, then holding down F+D while
you turn it on again.  This clears and reinitializes memory.

If the transceiver frequently displays the error, have the battery replaced
by an authorized Radio Shack repair center.

Er2:  PLL Unlock Error

Er2 indicates that the HTX-404's PLL section has unlocked.  Have the HTX-
404 repaired by an authorized Radio Shack repair center.

(RLR-02-25-94)