Sound Bat II  (600-4137)          Operation            Faxback Doc. # 15967

WARNING:  Never play with the Sound Bat II in the street.

1.  Set the Sound Bat II's ON/OFF switch to ON.

2.  To hear the Sound Bat II's engine, set SOUND ON/OFF to ON.  You hear
    the idling sound when you turn on the Sound Bat II, and the turbo sound
    when you drive it.

3.  Use the transmitter's control levers to operate the Sound Bat II.

    Left Control Lever

        Push forward to move forward (F).

        Push forward all the way for turbo power (T).

        Pull backward to move backward (B).

        Release to stop (O).

    Right Control Lever

        Push left to move left (L).

        Push right to move right (R).

        Release to go straight (S).

4.  When you finish driving the Sound Bat II set ON/OFF to OFF.

If the sound Bat II moves slowly or does not move at all, replace its
batteries.  If you are using nickel-cadmium batteries, recharge them.  If
the Sound Bat II still moves slowly, check the wheels for lint, thread,
hair, or dust.

WHEEL ALIGNMENT

If the Sound Bat II does not go in a straight line when you release the
right control lever, adjust the wheel alignment control lever on the bottom
of the Sound Bat II.

Insert a coin into the slot on the wheel alignment control and turn it
either clockwise or counterclockwise until the front wheels are in line
with the vehicle's rear wheel.


(ALL-07/18/95)