Walking Dino  (600-4123)     Battery Installation      Faxback Doc. # 3461

INSTALLING THE WALKING DINO'S BATTERIES

The Walking Dino requires two AA batteries (not supplied).  We recommend
alkaline batteries.  Such as Radio Shack Cat. No. 23-552/557.

1.  Be sure ON/OFF is set to OFF.

2.  Open the battery compartment by pulling its handle down and out.

3.  Place two AA batteries in the compartment, as indicated by the
    polarity symbols (+ and -) marked inside the compartment.

4.  Replace the cover.

INSTALLING THE AMMONITE CONTROLLER'S BATTERY

The ammonite (fossil) controller requires one 9-volt battery
(not supplied).  We recommend a long, life battery such as Radio Shack
Cat. No. 23-583.

1.  Open the battery compartment cover by sliding it in the direction
    shown in the illustration.

2.  Place one 9-volt battery in the compartment, as indicated by the
    polarity symbols (+ and -) marked inside the compartment.

3.  Replace the cover.

(br/all-12/06/94)