Snap-on Phone Amplifier  (430-0229)   Specifications   Faxback Doc. # 15329

Circuit:.......................................................4 Transistor
Control:..............................Volume control with ON and OFF switch
Operation Temperature:.............................0 degrees - 45 degrees C
Demension:.............................................L64 x W62 x H28 (cm)
Weight:..............................................103g (without battery)

Test Condition
   Test Voltage:.........................................DC 1.5 +/- .1 volt
   Output Impedance:................................................40 Ohms
   Input Impedance:................................................600 Ohms
   Refe Output:.........................................................1mW
   Test Frequency:...................................................1000Hz

                               Unit          Nominal         Linit

Sensitivity:                   uV            150             300
Output Power @ 10% Dist:       Mw              5             3.5
T.H.D. @ VR max Ret Output:     %              2               5
Frequency Response:            Hz            400             500
(-6dB @ VR max)
                               KHz             5               3
Current drain at no signal:    mA             25              20


(ALL-05/18/95)