ET-150 Touch-Tone/Pulse Dialing Desk Telephone
(430-0362)                    Operation               Faxback Doc. # 17204

Storing a Number in an Automatic Dialing Button

A total of five telephone numbers can be stored in memory and later
accessed by using the Automatic Dialing Buttons.  Each Button can call a
number up to 16 digits long.  You can code the numbers by labeling the
card above them to be with name of a person or function, such as 'LARRY'
or 'CALL TRANSFER'.

Before you begin entering the numbers, be sure that fresh batteries have been installed.

First set the PULSE/TONE Switch in the mode compatible with your phone
service...PULSE for rotary numbers, TONE for Touch-tone services.

1.  Place the handset on hook.

2.  Press STORE to activate the storing process.

3.  Select one of the buttons at the bottom of the phone for the
    upcoming number's storage.

4.  Push the buttons for the telephone number you want to store.

5.  Press STORE to lock the number in memory.

To call the number, lift the Handset, push the button assigned to the
number.  The telephone number is automatically dialed for you.