PGL-300 Pager
(170-8001)                  Alarms                     Faxback Doc. # 17644

Your Personal Pager has separate time, day, and date alarms.

NOTE:  You must turn on each alarm before you set it.

THE TIME ALARM

You can set the time alarm to sound at the same time each day.

1.  Press ON/OFF, FORWARD twice, then ON/OFF until TIME ALARM appears on
    the display.

2.  Press ON/OFF.  The current time alarm setting appears on the display.

3.  Press BACKSCROLL or FORWARD to turn the time alarm ON/OFF.  A bell 
    appears on the display when you turn on the alarm.

4.  Press ON/OFF.  The hour flashes.

5.  Repeatedly press BACKSCROLL or FORWARD until the desired hour appears.

6.  Press ON/OFF.  The minute setting flashes.

7.  Repeatedly press BACKSCROLL or FORWARD until the desired minute
    appears.

8.  Press ON/OFF to store the time alarm setting.  The display returns to 
    the standby mode.

THE DAY ALARM

You can set the day alarm to sound at a specific time every week on a 
particular day of the week (for example, for a weekly meeting).

1.  Press ON/OFF, FORWARD twice, ON/OFF, then FORWARD until DAY ALARM
    appears on the display.

2.  Press ON/OFF.  The current day alarm setting appears on the display.

3.  Press BACKSCROLL or FORWARD to turn the day alarm on/off.  A bell
    appears on the display when you turn on the alarm.

4.  Press ON/OFF.  The day flashes.

5.  Repeatedly press BACKSCROLL or FORWARD until the desired day flashes.

6.  Press ON/OFF.  The hour flashes.

7.  Repeatedly press BACKSCROLL or FORWARD until the desired hour appears.

8.  Press ON/OFF.  The minute flashes.

9.  Repeatedly press BACKSCROLL or FORWARD until the desired minute 
    appears.

10. Press ON/OFF to store the day alarm setting.  The display returns to
    the standby mode.

THE DATE ALARM

You can set the date alarm to sound one time at a specific date and time.

1.  Press ON/OFF, FORWARD twice, ON/OFF, then FORWARD until DATE ALARM
    appears on the display.

2.  Press ON/OFF.  The current date alarm setting appears on the display.

3.  Press BACKSCROLL or FORWARD to turn the date alarm on/off.  A bell
    appears on the display when you turn on the alarm.

4.  Press ON/OFF.  The month flashes.

5.  Repeatedly press BACKSCROLL or FORWARD until the desired month appears.

6.  Press ON/OFF.  The date flashes.

7.  Repeatedly press BACKSCROLL or FORWARD until the desired date appears.

8.  Press ON/OFF.  The hour flashes.

9.  Repeatedly press BACKSCROLL or FORWARD until the desired hour appears.

10. Press ON/OFF.  The minute flashes.

11. Repeatedly press BACKSCROLL or FORWARD until the desired minute
    appears.

12. Press ON/OFF to store the date alarm setting.  The display returns to
    the standby mode.


(CS/all-10/26/95)