Caller ID System 360
(430-0963)          Receiving and Storing Calls       Faxback Doc. # 18040

The module always displays the current time and date.  The module also
automatically displays all received caller ID information for every
incoming call, including the caller's telephone number and the call's time
and date.  In some areas, the caller's name is also sent.  As it receives
calls, it stores the information in the module's memory for later recall.

NOTES:  After the module has stored 99 caller ID records, newly received
        calls replace the oldest stored records.

        When the module is not displaying calls, the display shows the
        current time and date.

        When you receive a call or when you press DELETE or REVIEW, if you
        are using the supplied AC adapter, the display lights up.  This
        lets you easily read the display in a dimly lit room or even in
        total darkness.

NEW CALLS

If the module has received a call since the last time it was reviewed (see
"Reviewing/Deleting Call Information" Faxback Doc. #         ), the message 
received indicator flashes.  Press REVIEW <- or -> to turn off the indicator.

UNAVAILABLE

If the caller is calling from outside the caller ID service area or a
caller ID service is not available in the caller's area, UNAVAILABLE
appears on the display.

If the caller has elected to block caller ID information, ANONYMOUS CALL
appears on the display for about 30 seconds, and the message received
indicator flashes.

When call information is not sent by the telephone company, the display
shows NO DATA SENT.  This happens if you have not subscribed to Caller ID
service or if you answer the call before the second ring.

If you have new voice mail, the message received indicator flashes slowly
after you receive a message.

MESSAGE WAITING

If you subscribe to your phone company's voice mail feature and they send
a signal to your caller ID system when you have new voice mail, MESSAGE
WAITING appears on the display and the message received indicator flashes
until you retrieve the message from the telephone company.

If there is an error in the Caller ID transmission, LINE ERROR appears on
the display.

NOTE:  Minor electrical disturbances can affect the caller ID information.
       Occasional errors are normal.  If the module frequently displays
       LINE ERROR, contact your local telephone company or Radio Shack
       store for assistance.


(PH 11/3/95)