Telephone Recording Control
(430-0228A)                Installation               Faxback Doc. # 18311
 
You can connect the recording control directly to the phone line through a 
modular jack.  If your phone line does not have a modular jack, you must 
update the wiring.  You can convert the wiring yourself using jacks and 
adapters available at your local Radio Shack store.  Or, you can let the 
phone company update the wiring for you.  The phone company will charge 
you for the installation of the necessary jacks.  The phone company will 
ask you for the USOC number of the jack to be installed.  This number is 
RJ11C. 

1.  Disconnect you telephone's cord from the wall jack and insert it into
    the jack on the control. 

2.  Insert the plug from the control's short modular cord into the wall
    jack.

3.  Insert the control's larger phono-type plug into the cassette
    recorder's microphone jack.  Insert the smaller plug into the
    recorder's remote jack.

CHECKING THE INSTALLATION 

1.  Prepare your cassette recorder for recording. 

2.  Move the switch on the control to RECORD. 

3.  Lift the telephone receiver.  Be sure that the tape starts moving. 
    When you replace the receiver, the tape should stop. 


(CS 11/14/95)