AFX-300 Deluxe Automatic Fax/Data Switch (430-1245) Quick Start Faxback Doc. # 19570 PROGRAMMING QUICK START Programming from an Extension Phone 1. Pick up any phone on the same line as the AFX-300. 2. Enter 1, *, then your 2-digit access code (preset to 99). 3. Enter a remote command. 4. Hang up the phone. NOTE: To program another feature, repeat these steps. Programming from a Remote Phone 1. Dial your phone number. 2. After the TAD or fax switch answers, enter 1, *, then your 2-digit access code (preset to 99). 3. Enter a remote command within 10 seconds. 4. Hang up the phone. NOTE: To program another feature, repeat these steps. Command Default You Number of Times the Setting Press AFX-300 Beeps Change the Access Code (New 99 * 1, New 2 code can be from 00-99) Code Change the Ring Number Setting 5 * 2, 2 (Ring number can be from 1-7) Ring Number First Number Distinctive Ring On * 3 2=On (automatic fax modem) 3=Off Second Number Distinctive Ring Off * 4 2=On (automatic data modem) 3=Off Turn On/Off the FAX and MODEM On * 5 2=On jacks 3=Off Turn On/Off the TAD jack On * 6 2=On 3=Off Turn On/Off the Fax Password Off * 7 2=On (The preset password, if on, 3=Off is 1 # 9 9) Route Data Modem Calls to the Off * 8 2=On FAX jack 3=Off Turn On/Off Automatic Modem Off * 9 2=On Detection (AMD) 3=Off (EB 1/15/96)