Midnight II 13-Memory Fashion Fone
(430-0829)                 Preparation                Faxback Doc. # 31420

SETTING THE TONE/PULSE SWITCH

Set the TONE/PULSE switch for the type of service you have.  If you are
not sure which type you have, do this simple test.

1.  Set TONE/PULSE to TONE.

2.  Lift the handset and listen for a dial tone.

3.  Press any number button other than 0.
    
    If the dial tone stops, you have touch-tone service.  Leave TONE/PULSE
    set to TONE.

    If the dial tone continues, you have pulse service.  Set TONE/PULSE to
    PULSE.

NOTES:  The * and # buttons have no effect when TONE/PULSE is set to PULSE.

        If you have pulse service and want to use a special service that 
        requires tone signals (such as bank-by-phone), see Faxback Doc.
        # 31419, Operation.

SETTING THE RINGER OFF/LO/HI SWITCH

Your telephone has a ringer OFF/LO/HI switch.  Set the switch to the 
desired position.

NOTE:  If you set it to OFF, you can still make outgoing calls and, if
       an extension phone rings or the ringer indicator flashes, you can
       answer incoming calls.


(CS 3/14/96)