MOTOROLA MICRO T-A-C 550 Cellular Telephone 170-1996 Accessories Faxback Doc. # 34068 Chargers Your battery needs no maintenance other than routine charging. The battery should be at or near room temperature when charging. The accessories shipped with your phone vary by model. All accessories are available as options if you do not receive them with your phone. Over night Dual Charger The Overnight Dual Charger accommodates any two batteries. The front pocket can recharge a battery with the phone attached. The yellow lamps indicate that the unit or batteries are properly inserted and charging. The lamp on the charger will not change color or extinguish when charging is complete. Charger Rates Charger Type Hours (to 90% Capacity) Talk Pak 7 Standard 8 XT 11 Talk Pak XT 12 NOTE: It is recommended that the XT and the Talk Pak XT batteries be charged in the front pocket. Provided the phone is turned off, the Talk Pak will recharge fully in 9 hours, the standard battery in 10 hours, the Talk Pak XT and XT batteries in 14 hours. IntelliCharge XT Rapid Charger The optional IntelliCharge XT Rapid Charger accommodates any two batteries. The front pocket can recharge a battery with the telephone attached. NOTE: It is recommended that the XT & Talk Pak XT be charged in the front pocket. The battery in the front pocket has priority and if it is in range, is rapid charged first. Once the rapid charge of the front pocket battery is complete, the charger switches to rapid charge of the second battery. Each pocket of the IntelliCharge XT Rapid Charger has its own multi-color lamp to indicate that the battery and/or telephone have been properly placed in the charger pocket and that the battery is either rapid charging (red) or trickle charging (green). A flashing yellow lamp indicates that the battery is out of range for a rapid charge, or waiting for the battery in the priority pocket to be charged first. The standard and Talk Pak batteries will charge to 90% of capacity within 60 minutes. The XT and Talk Pak batteries will rapid charge to 90% of capacity within 80 minutes. The Talk Pak XT to 90% in 90 minutes. To protect the battery, rapid charging halts prior to reaching full charge and trickle charging begins. Leave the standard and Talk Pak batteries in the IntelliCharge XT Rapid Charger for two additional hours to reach full capacity, three additional hours for the XT or Talk Pak XT battery. Batteries will not rapid charge when they are below 50 degrees F (10 degrees C) or above 113 degrees F (45 degrees C). In addition, new batteries (or batteries which have been stored without use) may not rapid charge. In these instances, the charger light will turn green within 1 minute, indicating the need for overnight charging. Leave the standard and Talk Pak XT batteries require 15 hours to reach full capacity. New batteries may take up to five discharge/overnight recharge cycles before reaching maximum capacity. NOTE: If you have an IntelliCharge Rapid Charger and an Overnight Dual Charger, be certain to plug each charger's transformer into the proper base. They are not interchangeable. Ultra Saver The optional Ultra Saver requires no installation and allows you to power your telephone from a vehicle's battery via the cigarette lighter. This is particularly valuable when driving rental cars. While using the Ultra Saver, you conserve your phone's battery, and also provide a slow charge to the battery. To attach the Ultra Saver to your phone, locate the metal contacts on the flat side of the Ultra Saver connector, as well as those on the bottom-rear of the phone, below the hinge. Match the metal contacts together, making sure that the white dot on the Ultra Saver connector faces the same direction as the front of the telephone. You will hear a click to indicate that the connection has been properly made. Plug the Ultra Saver into the vehicle's cigarette lighter socket. Your telephone will now be powered by the vehicle's battery rather than the telephone's battery. The keypad backlighting and display will remain on as long as the Ultra Saver is attached to the unit and plugged into the vehicle. NOTE: The Ultra Saver has a three-amp fuse, which you may replace yourself if necessary. To remove the Ultra Saver from the phone, use one of the two following methods: Standard Method Turn off your telephone, then squeeze both sides of the Ultra Saver connector until the tabs release. Then remove the connector from the rear of the phone. Quick Change Method This method allows you to unplug your telephone from the Ultra Saver during a telephone call without losing the call. Unplug the coil cord from the telephone by squeezing both sides of the Ultra Saver connector until the tabs release, then press PWR. This will return you to your telephone call. The phone will not go through the normal power-up cycle described on page 15. You will only have 5 seconds to complete this action before your telephone call is terminated. Advise the party on the other end of the call before beginning this procedure. Nickel Metal Hydride Batteries are high capacity batteries which offer up to 30% more talk time than comparable Nickel Cadmium Batteries. To insure maximum life and capacity of your new Nickel Metal Hydride Battery, it is suggested that you charge with Motorola approved chargers, and do not leave the battery in the charger for more than 24 hours. THE Portable Cellular Connection Your MICRO T-A-C is data compatible and may be used in conjunction with THE Portable cellular Connection to connect to peripheral devices that are compliant with telephone industry RJ 11 specifications. THE Portable Cellular Connection for the MICRO T-A-C series of phones consists of a cable that is plugged into the convertible adapter outlet on the bottom of the phone. The diagram above shows a typical connection for this type of interface. (BR/EB 7/11/96)