TandyFax 1010  (430-1205)     Setting the Parameters    Faxback Doc. # 8970

The fax machine has a varity of special parameters.  There is no need to
change most of these parameters under normal circumstances.

See the chart for the list of parameters and their explanation.  Then,
follow this procedure to change a setting:

       PRESS                                       DISPLAY
        ┌─┐                                      ┌──────────┐
1       │#│                                      │ -        │
        └─┘                                      └──────────┘
        ┌─┐                                      ┌──────────┐
2       │#│                                      │ --       │
        └─┘                                      └──────────┘
                                                 ┌───────────┐
3  Enter the two-digit parameter number          │01    [1] 1│
   precede single-digit codes with a 0.          └───────────┘
   Example: 0 1 for resolution
   default.
                                                 ┬────────────┐
4  Enter desired setting                         │ 01    [1] 2│
                                                 └────────────┘
   Example: 2 changes the default
            resolution to FINE.
    ┌───────────┐                                ┌───────────┐
5   │START/ENTER│                                │--         │
    └───────────┘                                └───────────┘
    ┬─────────┐                               ┌─────────────────┐
6   │STAND BY │                               │09-20-1990 03:00P│
    ┴─────────┘                               └─────────────────┘

Parameter Table

Parameter  Parameter    Setting   Setting       Standard     Comment
Number                  Number                  Setting
───────────────────────────────────────────────────────────────────────────
01        RESOLUTION       1      Standard          0       Temporarily set
                           2      Fine                       with the front
                           3      Super Fine                 panel control.
───────────────────────────────────────────────────────────────────────────
02        CONTRAST         1      Normal            0         Also set with
                           2      Light                         front panel
                                                                   control.
───────────────────────────────────────────────────────────────────────────
                           1      Inside copy area  0       Indicates where
06        HEADER           2      Outside copy area          the station ID
          PRINT            3      Not printed                       prints.
───────────────────────────────────────────────────────────────────────────
07        DIALING          1      Touch-Tone        0
          METHOD           2      Pulse
───────────────────────────────────────────────────────────────────────────
          XMT IN NO        1      Allowed           0      If allowed, some
          PAPER                                                transactions
13        (Send when no                                        might not be
          paper or other   2      Not Allowed                     recorded.
          error.)
───────────────────────────────────────────────────────────────────────────
          XMT JOURNAL      1      OFF               0
19        (Individual
          fax log)         2      ON
───────────────────────────────────────────────────────────────────────────
          CALLING TIME     1      Normal (65 sec.)  0         Might need to
27        (Waiting period  2      Long (80 sec.)          set to longer for
          after dialing)   3      Very long (95 sec.)       overseas faxes.
───────────────────────────────────────────────────────────────────────────
          INITIAL          1      OFF               0      Set this to 2 if
          OPERATOR                                           you will share
32        CALL                    ON                          fax and voice
          (Voice contact   2                                   on one line.
          beep)
───────────────────────────────────────────────────────────────────────────

(smc-03/02/94)