TandyFax 1000  (430-1200)       Memory Dialing          Faxback Doc. # 8975

Entering Memory-Dial Numbers

You can store up to 70 phone numbers of 36 digits  the machine's memory.
You give each of these numbers a two-digit code (01-70) for Memory dialing.
The first five (01-05) can be recalled and dialed using the One-Touch key.
Press MEMORY and the two-digit code for the remaining 65 numbers (06-70).
To enter a number in memory.

     PRESS                                         DISPLAY
                                             ┌─────────────────────┐
1   Function                                 │SET MODE (PRESS MODE)│
                                             └─────────────────────┘
                                             ┌─────────────────────┐
2   MODE                                     │ONE-TOUCH/MEM. NOS.  │
                                             └─────────────────────┘
                                             ┌─────────────────────┐
3   START                                    │ONE-TOUCH/MEM.       │
    ENTER                                    └─────────────────────┘
                                             ┌─────────────────────┐
4   To assign a One-Touch number,            │[02] TELEPHONE NO.   │
    press a One-Touch key.                   └─────────────────────┘
    Example: One-Touch key 02                        or

    To assign a memory number, press         ┌─────────────────────┐
    MEMORY and two-digit code on the         │[62] TELEPHONE NO.   │
    keypad.                                  └─────────────────────┘
    Example: MEMORY 6 2 
                                             ┌─────────────────────┐
5   Enter the telephone number               │[62] TELEPHONE NO.   │
    Example: 5 5 5 1 2 3 4                   │5551234              ┤
                                             └─────────────────────┘

Some telephone systems, such as those used in offices, requires you to dial
a code number and then pause to wait for the outside line to connect before
you can dial the number.  Program this pause by pressing REDIAL (PAUSE) in
the desired position.  The pause entry is shown as "-" on the display.  The
pause entry takes up one digit in memory.

You can add a space to the phone number to make it easier to read.  Press
DIAL/TEL to enter a space.  The space has no effect when the number is
dialed.  The space entry takes up one digit in memory.

                                             ┌────────────────────┐
Example: 9 PAUSE 5 5 5                       │[62] TELEPHONE NO.  │
         DIAL/TEL 1 2 3 4                    │9-555  1234         │
                                             └────────────────────┘

If you have rotary (pulse-dialing) service, you can take advantage of
special tone-access services, such as alternate long distance.  Enter the
local service number, then press SELECT (LDT) where you need to switch to
tone dialing.

This mode change is displayed as "I" on the display.  The LDT entry takes
up one digit in memory.

                                             ┌────────────────────┐
Example: 9 PAUSE 5 5 5                       │[62] TELEPHONE NO.  │
         DIAL/TEL 1 2 3 4                    │9-555 1234/1 1 1 1  │
         SELECT (LDT) 1 1 1 1                └────────────────────┘

If you make a mistake, use <CURSOR/CONTRAST or RESOLUTION/CURSOR> to move
the cursor to the incorrect number, and then enter the new number over it.

   ┌─────┐                                   ┌────────────────────┐
6  │START│                                   │[62] STATION NAME   │
   │ENTER│                                   └────────────────────┤
   └─────┘                                                         

7 Enter the receiving station's name (up to 15 characters).  This name is
  printed at the top of faxes you send to this station.

                                             ┌────────────────────┐
Example:  TANDY                              │[62] STATION NAME   │
          2 9 1 0 2 3 etc.                   │TANDY               │
                                             └────────────────────┘

If you make a mistake, use <CURSOR/CONTRAST or RESOLUTION/CURSOR> to move
to the incorrect character, and then enter the correct character over it.
To erase the incorrect character, press CLEAR.

   ┌─────┐                                   ┌───────────────────┐
8  │START│                                   │ONE-TOUCH/MEM.     │
   │ENTER│                                   └───────────────────┘
   └─────┘

9 Repeat Steps 4 to 8 to enter more numbers, or press STANDBY/STOP to
  return to the standby mode.

NOTE:  If you want to go back and change anything, press START/ENTER
       repeatedly to skip through the proceeding steps.  Then use
       <CURSOR/CONTRAST or RESOLUTION/CURSOR> to move the cursor to
       the position you want to change.  You do not need to re-enter
       everything.

(smc-03/02/94)