128K Electronic Organizer
(650-0841)                 Data Transfer              Faxback Doc. # 17665

The EC-359 can send records to and receive records from another EC-359.

You can send or receive any of the following types of records.

    Telephone/Business Card

    Notes

    Schedule Reminder

    Expense

You can transfer either all records stored in a record type, or only those
records that were stored since the last time you transferred records.

The receiving EC-359 stores transferred records within the same record 
type.  For example, when you transfer a telephone/business card record, 
the receiving EC-359 automatically stores the record with its own 
telephone/business card records.

CAUTION:  The EC-359 consumes more battery power than normal when it
          transfers records.  If you transfer a record or records
          containing more than about 3,192 bytes all at once, the main
          power battery might drain too quickly and the EC-359 might stop
          working.

To save battery power and for maximum battery life, count the number of 
bytes in the records you want to transfer (see "Memory Capacity"), and 
transfer fewer than 3,192 bytes at a time.

PREPARATION

To prepare both EC-359s for data transfer, place the sending organizer on
the right and upside down and the receiving organizer on the left. Covering
the organizers might help if there are bright florescent lights in the
area.

CAUTION:  Be careful not to move either organizer while transferring 
          records.

TRANSFERRING RECORDS

1.  Press TRANSFER on the receiving EC-359.  The transfer opening screen
    appears, and a flashing arrow appears on the left of SEND.

2.  Repeatedly press the solid ^ or the solid v on the receiving EC-359
    until the flashing arrow appears to the left of RECEIVE.

3.  If necessary, repeatedly press < (REV or REVERSE) or the > (FWD or 
    FORWARD) on the receiving EC-359 to select the type of record you want
    to transfer (CARD FILE, NOTES, SCHEDULE or EXPENSES).

4.  Press TRANSFER on the sending EC-359.  The display shows the transfer
    opening screen, and a flashing arrow appears to the left of SEND.

5.  If necessary, repeatedly press < (REV or REVERSE) or > (FWD or FORWARD)
    on the sending EC-359 to select the type of record you want to transfer
    to the receiving EC-359 (CARD FILE, NOTES, SCHEDULE, or EXPENSES).

6.  Press the return key (RECALL or RETURN) on the sending EC-359.  The
    display shows:

                              TRANSFER

                       TYPE (A) TO TRANSFER ALL
                       FILES

                       TYPE (N) TO TRANSFER NEW
                       FILES ONLY
   
7.  Press the return key (RECALL or RETURN) on the receiving EC-359, then
    press A (to send all records) or N (to send only records added since 
    the last transfer) on the sending EC-359.

    The sending EC-359 begins to transfer records to the receiving EC-359.
    During transfer, the receiving EC-359 displays TRANSFER RECEIVING IN
    PROGRESS PLEASE WAIT A MOMENT.  The sending EC-359 displays TRANSFER
    SENDING (CARD FILE, NOTES, SCHEDULE or EXPENSES) IN PROGRESS PLEASE
    WAIT A MOMENT.

    When the transfer is complete, the sending EC-359 displays TRANSFER
    SUCCESSFUL Y/N?

  . If FILES ARE BEING SORTED ! and PLEASE WAIT A MOMENT appears on the
    receiving EC-359's display followed by the last record sent, press Y
    on the sending EC-359.

    IF FILES WERE NOT RECEIVED SUCCESSFULLY.  REALIGN AND PRESS "RETURN"
    TO TRY AGAIN and TO EXIT FILE TRANSFER, PRESS ANY MODE KEY appears on
    the receiving EC-359, press N on the sending EC-359.  Make sure the
    transmit and receive windows on both organizers are aligned, then try
    again.  Or, press any mode key to exit file transfer on both EC-359's.

    If the transfer was not successful, the sending EC-359 displays YOUR
    FILES DID NOT TRANSFER SUCCESSFULLY.  REALIGN AND PRESS "RETURN" TO
    TRY AGAIN and TO EXIT FILE TRANSFER, PRESS ANY MODE KEY.  Make sure the
    transmit and receive windows on both organizers are aligned,  then try
    again.  Or, press any mode key on either organizer to exit file 
    transfer.

    If there are no records to transfer in the sending EC-359, it displays
    TRANSFER NO FILES SENT ! and TO EXIT FILE TRANSFER, PRESS ANY MODE KEY,
    and the receiving EC-359 displays TRANSFER NO FILES RECEIVED ! and TO
    EXIT FILE TRANSFER, PRESS ANY MODE KEY.  Press any mode key on either 
    organizer to exit file transfer.

NOTES:  Either EC-359's display might flash during the transfer.  The 
        display returns to normal after you complete the transfer.

        If the receiving EC-359 displays MEMORY FULL, there is not enough
        memory to store the records transmitted by the sending EC-359.
        Delete some records from the receiving EC-359 and try again.

        If you transfer records from the sending EC-359 that are identical
        to the records already stored in the receiving EC-359, the
        receiving EC-359 stores the duplicated records.


(CS/all-10/27/95)