Illuminator Multi-Function Alarm Watch
(630-5083)              Replacing The Battery         Faxback Doc. # 18347

If the watch slows or the display dims, follow these steps to replace the
3V lithium CR2016 battery.  We recommend Radio Shack Cat. No. 23-160.  

1.  Use a small screwdriver to remove the four small screws on the battery
    compartment cover.  

    NOTE:  The screws are extremely small and can be easily misplaced.
           Be sure you note where you place them.  

2.  Remove the cover and the clear plastic insulator sheet.

3.  Remove the screw on the cover of the battery holder.

4.  Lift the battery holder out of the way, remove the old battery, and  
    install a new one with the positive (+) side up.  

    NOTE:  Do not touch the new battery.  Install it by using clean gloves
           or a clean, soft cloth to handle it.  Fingerprint oil will
           shorten the life of the battery.

    WARNING:  Immediately discard the old battery.  Never allow children
              to play with the battery.  Swallowing a battery could be
              fatal.

    CAUTION:  Use only a fresh battery of the required size and type.
              Always remove an old or weak battery.  

5.  Replace the battery holder cover and secure it with the screw you  
    removed in Step 3.  

6.  Replace the plastic insulator sheet and the battery compartment cover
    and secure the cover with the screws you removed in Step 1.


(EB 11/20/95)