Jumbo-LED Digital Alarm Clock
(630-0749)                 Operation                  Faxback Doc. # 18509

Setting the Time

1.  While you hold down TIME, press HOUR until the desired hour appears
    on the display.

    NOTE:  The PM indicator appears if it is a PM hour.

2.  Continue to hold down TIME and press MINUTE until the desired minute
    appears on the display.

Setting the Alarm Time

1.  While you hold down ALARM, press HOUR until the desired hour appears
    on the display.

2.  Continue to hold down ALARM and press MINUTE until the desired
    minute appears.

NOTES:  Press ALARM, HOUR, and MINUTE at the same time to set the alarm to
        12:00 AM.

        Press ALARM to view the alarm time at any time.

Using the Alarm

1.  Set ALARM ON/OFF to ON.  The ALARM indicator lights.  When the clock
    reaches the alarm time, the alarm sounds.

2.  When the alarm sounds, set ALARM ON/OFF to OFF to turn it off.  The
    alarm's volume increases once if you do not turn it off for 8 seconds,
    and again if you do not turn it off for 10 seconds after that.

3.  Set ALARM ON/OFF back to ON to reset the alarm to sound at the same
    time the next day.

NOTE:  If you do not turn off the alarm, it sounds for about 2 hours, then
       automatically resets to sound at the same time the next day.

Using Snooze

To temporarily turn off the alarm for about 9 minutes, press SNOOZE while
the alarm sounds.  The alarm turns off and sounds again in about 9 minutes.
You can press SNOOZE as many times as you desire.


(JC   11/2/95)