Jumbo LCD Ultra-Thin Clock
(630-0743)                 Installation               Faxback Doc. # 18618

Your Radio Shack Jumbo LCD Ultra-thin Clock combines a simple design with
advanced technology.  The clock's large digits make it easy to see from
across the room.  You can mount the clock on a wall or prop it up on its
built-in stand.

INSTALLING/REPLACING THE BATTERY

Your clock uses one AAA battery (not supplied) for power.  For the longest
life and best performance, we recommend an alkaline battery, such as Radio
Shack Cat. No. 23-555.

Follow these steps to install or replace the battery.

1.  Remove the battery compartment cover by pressing and holding its latch
    in the direction of the arrow, then lifting the cover.

2.  If necessary, remove and discard the old battery.

    CAUTIONS:  Always dispose of old batteries promptly and properly.

               Never leave an old, dead, or weak battery in the clock.
               Batteries can leak chemicals and corrode or damage
               electronic circuits. 

               If you do not plan to use your clock for a month or more,
               remove the battery to protect the clock from possible
               battery leakage.

3.  Insert one fresh AAA battery in the compartment as indicted by the
    polarity symbols (+ and -) marked inside.  12:00 appears and : flashes
    on the display.

    CAUTION:  Use only a fresh battery of the required size and type.

4.  Replace the cover.

If the clock does not operate properly, replace the battery.


(JC  12/4/95)