Jumbo-LED Digital Alarm Clock
(630-0796)                 Operation                  Faxback Doc. # 19522

Setting the Time

1.  While you hold down TIME, press (or press and hold) HOUR until the
    desired hour appears on the display.

    NOTE:  The PM indicator appears if it is a PM hour.

2.  Continue to hold down TIME and press (or press and hold) MINUTE until
    the desired minute appears on the display.  Then release TIME.

Setting the Alarm Time

1.  While you hold down ALARM, press (or press and hold) HOUR until the
    desired hour appears on the display.

2.  Continue to hold down ALARM and press (or press and hold) MINUTE until
    the desired minute appears.  Then release ALARM.

NOTES:  Press ALARM, HOUR, and MINUTE at the same time to set the alarm to
        12:00 AM.

        Press ALARM to view the alarm time at any time.

Using the Alarm

1.  Set ALARM ON/OFF to ON.  The ALARM indicator lights.  When the clock
    reaches the alarm time, the alarm sounds.

2.  When the alarm sounds, set ALARM ON/OFF to OFF to turn it off.

3.  Set ALARM ON/OFF back to ON to reset the alarm to sound at the same
    time the next day.

NOTE:  If you do not turn off the alarm, it sounds for about 2 hours, then
       automatically resets to sound at the same time the next day.

Using Snooze

To temporarily turn off the alarm for about 9 minutes, press the button on
top of the clock while the alarm sounds.  The alarm turns off and sounds
again in about 9 minutes.  You can press the button on top of the clock as
many times as you like.

Note:  If the BATTERY SENTINEL indicator lights while you press the button
on top of the clock, the backup battery is getting low.


(EB 1/19/96)