LCD Chrono Alarm Watch
(630-5057)                  Operation                 Faxback Doc. # 31317

Setting Time and Date

1.   Press the bottom button on the left and hold for about five seconds
     until the alarm hour numerals and the A or P flash on the display.

2.   Release.  Then press the button again.  The time setting function is
     activated and then the seconds flash.

3.   Press the bottom button on the right.  The seconds return to 00.

4.   Press the top button on th right.  The minutes flash.

5.   Press the bottom button on the right to set the minutes.

6.   Press the top button on the right.  The hour and the A or P flash.

7.   Press the bottom button on the right and continue pressing for correct
     setting.  The hour advances and the A flashes.

8.   Press the top button on the right.  The month flashes.

9.   Press the bottom button on the right and continue pressing for correct
     setting.

10.  Press the top button on the right.

11.  Press the bottom button on the right for the correct setting.

12.  Press the top button on the right.  The bar over the day of the week
     flashes.

13.  Press the bottom button on the right until you get the correct
     setting.

14.  Press the top button on the right to return to the seconds setting
     mode


(IR-03/12/96)