EC-367  Telephone Directory with Spell Checker
(650-0881)                 Secret Memory Area         Faxback Doc. # 31526

USING THE SECRET MEMORY AREA

The EC-367's secret memory area protects your data against anyone seeing
it except you.  Once you register a password of up to 8 characters long,
only those who input the correct password can view the data stored in the
secret memory area.

TO REGISTER A PASSWORD AND CREATE A SECRET MEMORY AREA

EXAMPLE:  To register the password "ABC".

1.  Press SECRET.

2.  If necessary, press ALPHA/NUMBER to display the alpha-character mode
    indicator ([A]), then press the keys that spell out the password:
    [A] [B] [C].

3.  Press SET to store the password.  The key symbol appears to indicate
    you have entered the secret memory area.

    If a different password was already registered, PASSWORD ? reappears
    on the display.

IMPORTANT!

If you forget your password, you will not be able to access any of the data
stored in the secret memory area.  If this happens, you can clear the
secret memory area then register your password again.  To clear the secret
memory area, however, you must perform the RESET operation, which clears
the password and deletes all data in memory.

TO INPUT DATA IN THE SECRET MEMORY AREA

1.  Press SECRET.

2.  Input the correct password.

3.  Press SET.

    If you input the wrong password, PASSWORD ? appears when you press
    SET.  Carefully input the correct password.

4.  Now you can input data as described under "Inputting and Editing
    Characters".

    To exit the secret memory area, press TELEPHONE, SPELL, or SECRET.
    The key symbol disappears.

TO RECALL DATA IN THE SECRET MEMORY AREA

1.  Press SECRET.

2.  Input the correct password.

3.  Press SET.

4.  Now you can recall data as described in "Recalling data".

TO EDIT OR DELETE DATA IN THE SECRET MEMORY AREA

1.  Press SECRET.  

2.  Input the correct password.

3.  Press SET.

4.  Now you can edit data as described in "To Edit Stored Data" and delete
    data as described in "To Delete Data from Memory".

TO CHANGE THE PASSWORD

1.  Press SECRET.

2.  Input the current password.

3.  Press SET.

4.  Press CLR then SECRET to display the current password.

5.  Press EDIT.  The cursor appears under the first letter of the current
    password.

6.  Make any changes you want to the password and then press SET to 
    register it.

    To cancel this operation at any time before you press SET in Step 6,
    press TELEPHONE.


(EB 3/26/96)