CASIO MODULE NO. 1199 ES
(630-5240)                 Maintenance                Faxback Doc. # 31775

Care of your watch

*   This watch has been developed for full heavy duty use.  To protect the
    electronic parts, it has dampers both on the inner and outer sides and
    thus, outstanding shock-resistance and vibration-resistance can be 
    ensured.

    Shock-resistance:  The watch can be worn on the wrist during any hard
                       sports.  (Use care not to allow the front glass to
                       butt against any hard object.)

    Vibration-resistance:  The watch can be worn during motorcross, chain
                           saw operation, rock drill operation, and so on.

*   Never try to open the case or remove its back cover.

*   You should have the rubber seal that keeps out water and dust replaced
    every 2 to 3 years. 

*   Should moisture appear inside the watch, have it checked immediately
    by your dealer or CASIO distributor.

*   Avoid exposing the watch to temperature extremes.

*   Do not fasten the band too tightly.  You should be able to insert your
    finger between the band and your wrist.

*   To clean the watch and band, use a dry soft cloth or a soft cloth
    moistened in a solution of water and a mild neutral detergent.  Never
    use volatile agents (such as benzene, thinner, spray cleaners, etc.).

*   Store your watch in a dry place when you are not using it.

*   Avoid exposing the watch to gasoline, cleaning solvents, aerosol
    sprays, adhesive agents, paint, etc.  Chemical reactions with such
    agents will destroy seals, case and finish.

*   Some models feature silk screen printing on their bands.  Be careful
    when cleaning such bands so that you do not rub on the printed designs
    too hard.

*   For watches equipped with resin bands...
    You may notice a whitish powdery substance on the band.  This substance
    will not harm your skin or clothing, and can be removed by simply
    wiping it with a cloth.

For watches equipped with fluorescent bands and cases...

*   Long-term exposure to direct sunlight can cause fluorescent coloring
    to fade.

*   Long-term contact with moisture can cause fluorescent coloring to
    fade.  Be sure to wipe all moisture from the surface of the watch as
    soon as possible.

*   Long-term contact with any other surface while wet can cause
    discoloration of fluorescent colors.  Be sure to keep moisture from
    fluorescent surfaces and avoid contact with other surfaces. 


*   Strongly rubbing a printed fluorescent surface with another surface
    can cause the color of the printing to transfer to the other surface.

CASIO COMPUTER CO., LTD assumes no responsibility for any loss or claims by third parties which may arise through the use of this watch.


(EB 4/8/96)