Talking LCD/Digital Watch
(630-5044)                 Battery                    Faxback Doc. # 32147

REPLACING THE BATTERY

Your watch uses a 3V lithium (CR2016) battery.  We recommend Radio Shack
Cat. No. 23-160.  

If the watch slows or the display dims, follow these steps to replace the
battery.

1.  Use a small screwdriver to remove the four small screws on the back of
    the watch.

    NOTE:  The screws are extremely small and can be easily misplaced.  Be
           sure you note where you place them.

2.  Remove the watch's back.

3.  Remove the sound disc and set it aside carefully.

4.  Remove one of the screws on the cover of the battery holder and loosen
    the other one slightly.

5.  Slide the battery holder cover out of the way, remove the old battery,
    and install a new one with the positive side up.

    CAUTION:  Use only a fresh battery of the recommended size and type.

              Always remove an old or weak battery.

    WARNING: Immediately discard the old battery.  Never allow children to
             play with the battery.  Swallowing a battery could be fatal.

6.  Replace the battery holder cover and the sound disc.

7.  Secure the watch's back with the small screws.

NOTE:  The watch resets to 12:00 AM after you replace the battery.


(EB/all-04/22/96)