EC-346 Data Directory 32K
(650-0862)                   Operation                Faxback Doc. # 32784


SETTING THE HOME TIME ZONE:

1.  Repeatedly press HOME TIME/WORLD TIME until the clock display appears;
    then press FUNCTION.

2.  Highlight zone change and press EXE.  The currently selected time zone
    flashes on the display.
3.  Use left arrow or right arrow to scroll horizontally until your time
    zone flashes, then press EXE.  The home time should appear on the
    display.

SWITCHING BETWEEN 12 AND 24 HOUR CLOCK

1.  Press HOME TIME/WORLD TIME and then press FUNCTION.

2.  Highlight 12/24 hours;  then press EXE.  The clock display appears in
    a 12 or 24 hours format.  AM or PM appears on the display in the 12 hr
    format and disappears in the 24 hour format.

SETTING THE HOME DATE AND TIME

1.  Display the clock and press FUNCTION.

2.  Highlight time set; then press EXE.  The first hour digit flashes.

3.  Enter the hour and minute using the number buttons (numbers are marked
    above the letters).  Set the minute 1 or 2 minutes ahead of the
    current time.  **NOTE: You must precede a one-digit hour or minute
    with a 0: 01, 02, etc.  Esach time you input a number, the flashing
    cursor moves to the right.

4.  If on the 12 hour format, preaa A for AM or P for PM.  The cursor
    moves to the date section.

5.  Enter the year, month and day in the same manner.  The first hour
    digit flashes.

6.  At the precise time signal for the time you set , press EXE.  The
    clock starts counting from 00 seconds.

SWITCH TO DAYLIGHT SAVINGS TIME

1.  Press HOME TIME/WORLD TIME until the time you wish to change to
    daylight saving time appears.

2.  Press FUNCTION.

3.  Highlight DST ON/OFF and press EXE.  DST appears on the display when
    you set daylight saving time to on and disappears when set it to off.

CHANGING THE WORLD TIME ZONE

1.  Repeatedly press THOME TIME/WORLD TIME until the globe display
    appears.

2.  Use right arrow or left arrow to scroll horizontally until the desired
    time zone appears on the display.  Zones change in the sequence shown
    in the City Code Table.  The data bank computes and displays the
    correct time difference based on the hiome time you set.


(IR-07/18/96)