Blue Seas Digital Clock with Alarm
(630-0732)                 Operation                  Faxback Doc. # 33303

SETTING THE TIME

Use (((SNZ)))/AL.OFF/AL.SET/TM SET and the H and M buttons on the bottom of
the clock to set the time.

1.  Set (((SNZ)))/AL.OFF/AL.SET/TM SET.

2.  Position the clock so you can view the digital display, then repeatedly
    press H to set the current hour.  If you press and hold down H, the
    hour continuously advances.

    NOTE:  Your clock uses a 12-hour format.  P appears for a PM hour.

3.  Repeatedly press M to set the current minute.  If you press and hold
    down M, the minutes continuously advance.

    The clock displays the current time after you set the minutes.

4.  Set (((SNZ)))/AL.OFF/AL.SET/TM SET to AL.OFF.

USING THE ALARM

The alarm beeps at the set alarm time.

Follow these steps to set the alarm time.

1.  Set (((SNZ)))/AL.OFF/AL.SET/TM SET to AL.SET.

2.  Position the clock so you can view the digital display, then repeatedly
    press H to set the alarm hour.  If you press and hold down H, the hour
    continuously advances.

    NOTE:  P appears for a PM hour.

3.  Repeatedly press M to set the alarm minute.  If you press and hold down
    M, the minutes continuously advance.

    The clock displays the current alarm time after you set the minutes.

4.  Set (((SNZ)))/AL.OFF/AL.SET/TM SET to (((SNZ))).

    The alarm sounds at the preset alarm time for 1 minute, then
    automatically turns off.  To silence the alarm before it automatically
    turns off, set (((SNZ)))/AL.OFF/AL.SET/TM SET to AL.OFF to save battery
    power.

NOTE:  You can temporarily turn off the alarm for about 4 minutes by
       pressing SNOOZE on the bottom of the clock.

VIEWING THE CURRENT ALARM TIME

To view the current alarm time, press and hold down M or H.  When you
release M or H, the display returns to the current time.


(ALL-06/07/96)