Sleep Machine Alarm Clock
(630-0637)                 Operation                  Faxback Doc. # 33702

USING THE ALARM CLOCK

OPENING THE COVER

1.  At the groove on top of the Sleep Machine, lift up the cover.

2.  Tip it toward the back of the machine as far as it will go so it stays
    open.

SETTING THE TIME

1.  Press 12/24 to select 12- or 24-hour format.  When you first connect
    power to the Sleep Machine, the 12-hour format is selected.

    NOTE:  In the 12-hour format, PM appears on the display to show a PM
           hour.

2.  Slide SET/RUN to SET.

3.  Press (or press and hold) HR until the desired hour appears on the
    display.

4.  Press (or press and hold) MIN until the desired minute appears on the
    display.

5.  Slide SET/RUN to RUN.

SETTING THE ALARM TIME

1.  While you press and hold ALARM SET, press (or press and hold) HR until
    the desired hour appears.

2.  Continue to hold down ALARM SET and press (or press and hold) MIN until
    the desired minute appears.

    NOTES:  PM appears on the display to show a PM hour in the 12-hour
            format.

            Press and hold ALARM SET to view the alarm time at any time.

USING THE ALARM

1.  Set the ALARM SOUND to BIRD (for chirping sound) or BEEP (for a beep
    sound).

2.  Adjust VOLUME to the desired level.  Do not leave the volume turned all
    the way down or you will not be able to hear the alarm when it sounds.

3.  Press ALARM ON/OFF once to set the alarm.  (Volume) appears on the
    display.  When the clock reaches the alarm time, the alarm sounds for
    about 3 minutes.

    If ALARM SOUND is set to BIRD, the volume increases after each group of
    three chips until it reaches the loudest sound.

4.  When the alarm sounds, press any button to turn it off.

NOTES:  Press ALARM ON/OFF again to turn off the alarm so it will not sound
        again the next day.

        The alarm will not sound at the preset time if MOOD on the Sleep
        Machine is set to HAWAIIAN SURF, NIGHT TRAIN, or TROPICAL RAIN and
        the selected sound has begun (see "Using the Sleep Machine" below).

USING THE BACKLIGHT

Press LIGHT/SLEEP TIMER to turn on the backlight so you can view the alarm
clock at night.  The light dims gradually in about 9 seconds.

USING THE SLEEP MACHINE

1.  Set MOOD to HAWAIIAN SURF, NIGHT TRAIN, or TROPICAL RAIN.

2.  Press and hold LIGHT/SLEEP TIMER and 0 0 appears on the display.

3.  Within about 15 seconds, press MIN to set the sleep timer from 00 to 59
    minutes.  The Sleep Machine begins making the selected sound.

4.  Adjust the VOLUME to a comfortable listening level.

To manually turn off the Sleep Machine before the set time elapses, set
MOOD to OFF.  To start the machine again, set MOOD to HAWAIIAN SURF, NIGHT
TRAIN or TROPICAL RAIN.  The machine sounds for the rest of the set time.

NOTES:  To set the sleep timer the next time, press and hold LIGHT/SLEEP
        TIMER, then press MIN once to recall the time length you set last
        time.  Repeatedly press (or press and hold) MIN to advance the
        minute.

        If you manually turn off the Sleep Machine before the set time
        elapses, the remaining set time will appear on the display when you
        press and hold LIGHT/SLEEP TIMER.

        When the minute display reaches 59, it goes to 0 0 and begins
        counting up again.

USING THE PILLOW SPEAKER

You can listen in privacy using the supplied pillow speaker.  Simply insert
the pillow speaker's 1/8-inch plug into the sleep machine's SPEAKER jack.

NOTE:  Connecting the pillow speaker automatically disconnects the built-in
       speaker.

CAUTION:  To prevent damage to the pillow speaker and to protect your
          hearing when you use the pillow speaker always turn VOLUME to its
          lowest setting before you turn on the machine. Then slowly adjust
          VOLUME to a comfortable listening level.

(LB/EB 06/20/96)