Safe House Remote Keypad  (490-0484)  Command Console  Faxback Doc. # 15710

Keys:

0-9                          - Code entry keys

HOME                         - Home mode select

AWAY                         - Away mode select

DELAY/TEST                    - Delay set; System test

PROG                          - System program

CANCEL                        - Cancel function

EMERGENCY (2) - Panic key

ADDRESS/AUDIO DISABLE         - 4 position dip switch

LEDS:

1-7                           - Zone indicators (green)

8                             - Trouble zone indicator (red)

Home                          - Home mode indicator (green)

Away                          - Away mode indicator (green)

Delay                         - Delay indicator (red)

Prog                          - Program indicator (red)

Armed                         - Arming indicator (red)

Status                        - Status indicator (green)

Fire                          - Fire alarm indicator (red)

Batt                          - Low battery indicator (red)

Main Unit:

KEYS:

System/Fire Reset             - System reset and Fire sensors reset

Default                       - System defaults key

CODE NUMBERS:  

The alarm will allow the user to store 1 Master Code, 6 User codes,
and 1 Ambush code.  Each code must be a 4 digit code.

When entering a code number to arm, disarm, or program the system,
the code must be entered within 30 seconds or the system will clear
any numbers entered up to that point. (If entering program mode, the
system will also default back to the disarmed state).


(pm/all-06/21/95)