Wireless Alarm System
(490-2011)                    Features                Faxback Doc. # 16942

The Radio Shack Wireless Alarm System provides quality security protection
for your apartment or home, and the system is expandable so you can add on
extra devices as your security needs grow.  The system is easy to install
because you do not need to run wires from the transmitters to the control
panel.  Also, the minimal installation makes it easy to move the system
from one location to another.

With the required accessories (not supplied), you can begin using the
system immediately.  Be sure you read this entire manual to learn the
correct procedures for preparing, installing, testing, and operating the
system.

The alarm system includes the following features:

              16 Security Zones - let the system monitor up to 16
                                  transmitters for wide-range protection.

Four-Digit Security Access Code - prevents unauthorized people from
                                  tampering with the system.

                 Built-In Siren - sounds an 85 dB tone (at 10 feet) when
                                  the alarm is triggered.

        Wireless Remote Control - lets you arm or disarm the system away
                                  from the base as you enter or leave your
                                  home.

     Home and Away Arming Modes - let you arm the system to protect doors
                                  and windows while you are at home, or arm
                                  the system for full protection of the
                                  interior and perimeter of your home while
                                  you are away.

                    Panic Alarm - lets you sound the siren while you are
                                  home to summon help in case of an
                                  emergency.

                Day Arming Mode - lets you use the system as an entry chime
                                  to make you aware of people entering and
                                  leaving your home.

Wireless Infrared Motion Sensor - detects when a person moves within the
                                  sensors protected area and signals the
                                  control panel.

   Support for External Devices - lets you connect an optional siren,
                                  automatic dialer, strobe light, or other
                                  external security device.

           Battery Backup Power - provides extra security by ensuring that
                                  the system operates even during a power
                                  failure.

         Low Battery Indication - lets you know when the battery in a
                                  door/window transmitter or motion sensor
                                  is low.

        LED Zone Status Display - shows you the status of each zone and
                                  other information, such as low battery or
                                  fire conditions.