Two-Zone Remote Keypad Burglar Alarm Control Center (490-0451) Specifications Faxback Doc. # 17694 Exit and Entry Delay Control Time: ...............0-45 seconds, adjustable Multiple Incorrect Pass Code Lockout Time: .......................1 minute Program Mode Time-Out: .........................................30 seconds Key Press Lock Time: ...........................................10 seconds Automatic Alarm Reset Time: .....................................5 minutes Trigger Resistance: NC: ..............Loop will trigger alarm if resistance exceeds 500 Ohms NO: ......Loop will trigger alarm if resistance is less than 50,000 Ohms Loop Resistance: NC: .......................................................500 Ohms Max. NO: ....................................................50,000 Ohms Min. Loop Response Time: NC: ..............................Requires 9 mS opening to trigger alarm NO: ..............................Requires 9 mS closure to trigger alarm Panic/Tamper: ......................Requires 9 mS closure to trigger alarm Power Consumption (Armed): (One 49-452 Keypad Installed): ...................................12 W (One 49-452 Keypad installed and 750 mA Accessory Load): .........23 W Backup Batteries: ....Two gel-cell batteries, 12V, 2.5Ah (Cat. No. 23-181) External Alarm Output (Terminal 16): ...................10-18V DC, 1A Max. Auxiliary DC Output (Terminal 14): .................10-18V DC, 750 mA Max. Alarm Relay Contact Capacity: ...................................24V DC 1A Fuse Type: .........3 A, 1 1/4-inch, Fast-Blow (such as Cat. No. 270-1009) Operating Temperature: ..................................32-122 F (0-50 C) Storage Temperature: ...............................-40 - 129 F (-40-65 C) Dimensions: ...........................10 1/4 X 8 1/4 X 3 7/8 inches (HWD) (260 X 210 X 98 mm) Specifications are typical; individual units might vary. Specifications are subject to change and improvement without notice. (SP/EB 5/25/96)