Plug'n Power Remote Controller/Timer
(610-2670)               Safety Precautions           Faxback Doc. # 18457

    Do not attempt to control lights or appliances that exceed the 
    rating of the modules.  If you want to control appliances that
    exceed the ratings of the standard modules, ask the personnel at
    your local Radio Shack store for information.

    Use extreme care when controlling a potentially dangerous
    product, such as heating appliance, as part of your plug 'n power
    system.  Use a separate unit code exclusively for such devices.

    If you want to control fluorescent, mercury vapor, sodium vapor,
    or low-voltage lights, ask your Radio Shack salesperson for
    assistance.

    Do not use lamp dimmer modules to control light fixtures that 
    have builtin dimmers.

    Do not use Wall Switch or 3-Way Switch modules to replace switches
    that control wall outlets or non-lighting devices.

    The switch and outlet modules require direct connection to your
    house wiring.  If you are not familiar with typical house wiring
    installations, we suggest that you have these types of modules
    professionally installed.  In any case, be sure that the 
    electricity is turned off at the circuit breaker while you are
    installing one of these modules.

    Low-voltage electricity flows through the circuit controlled by a
    switch module even when the switch is OFF.  This is necessary for
    proper operation of the switch module.  You can completely turn 
    off the electricity by setting the switch's DISABLE switch to off
    (left).


(/all-01/03/96)